/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */
/*
* cec - HDMI Consumer Electronics Control public header
*
* Copyright 2016 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
*/
#ifndef _CEC_UAPI_H
#define _CEC_UAPI_H
#include <linux/types.h>
#include <linux/string.h>
#define CEC_MAX_MSG_SIZE 16
/**
* struct cec_msg - CEC message structure.
* @tx_ts: Timestamp in nanoseconds using CLOCK_MONOTONIC. Set by the
* driver when the message transmission has finished.
* @rx_ts: Timestamp in nanoseconds using CLOCK_MONOTONIC. Set by the
* driver when the message was received.
* @len: Length in bytes of the message.
* @timeout: The timeout (in ms) that is used to timeout CEC_RECEIVE.
* Set to 0 if you want to wait forever. This timeout can also be
* used with CEC_TRANSMIT as the timeout for waiting for a reply.
* If 0, then it will use a 1 second timeout instead of waiting
* forever as is done with CEC_RECEIVE.
* @sequence: The framework assigns a sequence number to messages that are
* sent. This can be used to track replies to previously sent
* messages.
* @flags: Set to 0.
* @msg: The message payload.
* @reply: This field is ignored with CEC_RECEIVE and is only used by
* CEC_TRANSMIT. If non-zero, then wait for a reply with this
* opcode. Set to CEC_MSG_FEATURE_ABORT if you want to wait for
* a possible ABORT reply. If there was an error when sending the
* msg or FeatureAbort was returned, then reply is set to 0.
* If reply is non-zero upon return, then len/msg are set to
* the received message.
* If reply is zero upon return and status has the
* CEC_TX_STATUS_FEATURE_ABORT bit set, then len/msg are set to
* the received feature abort message.
* If reply is zero upon return and status has the
* CEC_TX_STATUS_MAX_RETRIES bit set, then no reply was seen at
* all. If reply is non-zero for CEC_TRANSMIT and the message is a
* broadcast, then -EINVAL is returned.
* if reply is non-zero, then timeout is set to 1000 (the required
* maximum response time).
* @rx_status: The message receive status bits. Set by the driver.
* @tx_status: The message transmit status bits. Set by the driver.
* @tx_arb_lost_cnt: The number of 'Arbitration Lost' events. Set by the driver.
* @tx_nack_cnt: The number of 'Not Acknowledged' events. Set by the driver.
* @tx_low_drive_cnt: The number of 'Low Drive Detected' events. Set by the
* driver.
* @tx_error_cnt: The number of 'Error' events. Set by the driver.
*/
struct cec_msg {
__u64 tx_ts;
__u64 rx_ts;
__u32 len;
__u32 timeout;
__u32 sequence;
__u32 flags;
__u8 msg[CEC_MAX_MSG_SIZE];
__u8 reply;
__u8 rx_status;
__u8 tx_status;
__u8 tx_arb_lost_cnt;
__u8 tx_nack_cnt;
__u8 tx_low_drive_cnt;
__u8 tx_error_cnt;
};
/**
* cec_msg_initiator - return the initiator's logical address.
* @msg: the message structure
*/
static __inline__ __u8 cec_msg_initiator(const struct cec_msg *msg)
{
return msg->msg[0] >> 4;
}
/**
* cec_msg_destination - return the destination's logical address.
* @msg: the message structure
*/
static __inline__ __u8 cec_msg_destination(const struct cec_msg *msg)
{
return msg->msg[0] & 0xf;
}
/**
* cec_msg_opcode - return the opcode of the message, -1 for poll
* @msg: the message structure
*/
static __inline__ int cec_msg_opcode(const struct cec_msg *msg)
{
return msg->len > 1 ? msg->msg[1] : -1;
}
/**
* cec_msg_is_broadcast - return true if this is a broadcast message.
* @msg: the message structure
*/
static __inline__ int cec_msg_is_broadcast(const struct cec_msg *msg)
{
return (msg->msg[0] & 0xf) == 0xf;
}
/**
* cec_msg_init - initialize the message structure.
* @msg: the message structure
* @initiator: the logical address of the initiator
* @destination:the logical address of the destination (0xf for broadcast)
*
* The whole structure is zeroed, the len field is set to 1 (i.e. a poll
* message) and the initiator and destination are filled in.
*/
static __inline__ void cec_msg_init(struct cec_msg *msg,
__u8 initiator, __u8 destination)
{
memset(msg, 0, sizeof(*msg));
msg->msg[0] = (initiator << 4) | destination;
msg->len = 1;
}
/**
* cec_msg_set_reply_to - fill in destination/initiator in a reply message.
* @msg: the message structure for the reply
* @orig: the original message structure
*
* Set the msg destination to the orig initiator and the msg initiator to the
* orig destination. Note that msg and orig may be the same pointer, in which
* case the change is done in place.
*/
static __inline__ void cec_msg_set_reply_to(struct cec_msg *msg,
struct cec_msg *orig)
{
/* The destination becomes the initiator and vice versa */
msg->msg[0] = (cec_msg_destination(orig) << 4) |
cec_msg_initiator(orig);
msg->reply = msg->timeout = 0;
}
/* cec_msg flags field */
#define CEC_MSG_FL_REPLY_TO_FOLLOWERS (1 << 0)
#define CEC_MSG_FL_RAW (1 << 1)
/* cec_msg tx/rx_status field */
#define CEC_TX_STATUS_OK (1 << 0)
#define CEC_TX_STATUS_ARB_LOST (1 << 1)
#define CEC_TX_STATUS_NACK (1 << 2)
#define CEC_TX_STATUS_LOW_DRIVE (1 << 3)
#define CEC_TX_STATUS_ERROR (1 << 4)
#define CEC_TX_STATUS_MAX_RETRIES (1 << 5)
#define CEC_TX_STATUS_ABORTED (1 << 6)
#define CEC_TX_STATUS_TIMEOUT (1 << 7)
#define CEC_RX_STATUS_OK (1 << 0)
#define CEC_RX_STATUS_TIMEOUT (1 << 1)
#define CEC_RX_STATUS_FEATURE_ABORT (1 << 2)
#define CEC_RX_STATUS_ABORTED (1 << 3)
static __inline__ int cec_msg_status_is_ok(const struct cec_msg *msg)
{
if (msg->tx_status && !(msg->tx_status & CEC_TX_STATUS_OK))
return 0;
if (msg->rx_status && !(msg->rx_status & CEC_RX_STATUS_OK))
return 0;
if (!msg->tx_status && !msg->rx_status)
return 0;
return !(msg->rx_status & CEC_RX_STATUS_FEATURE_ABORT);
}
#define CEC_LOG_ADDR_INVALID 0xff
#define CEC_PHYS_ADDR_INVALID 0xffff
/*
* The maximum number of logical addresses one device can be assigned to.
* The CEC 2.0 spec allows for only 2 logical addresses at the moment. The
* Analog Devices CEC hardware supports 3. So let's go wild and go for 4.
*/
#define CEC_MAX_LOG_ADDRS 4
/* The logical addresses defined by CEC 2.0 */
#define CEC_LOG_ADDR_TV 0
#define CEC_LOG_ADDR_RECORD_1 1
#define CEC_LOG_ADDR_RECORD_2 2
#define CEC_LOG_ADDR_TUNER_1 3
#define CEC_LOG_ADDR_PLAYBACK_1 4
#define CEC_LOG_ADDR_AUDIOSYSTEM 5
#define CEC_LOG_ADDR_TUNER_2 6
#define CEC_LOG_ADDR_TUNER_3 7
#define CEC_LOG_ADDR_PLAYBACK_2 8
#define CEC_LOG_ADDR_RECORD_3 9
#define CEC_LOG_ADDR_TUNER_4 10
#define CEC_LOG_ADDR_PLAYBACK_3 11
#define CEC_LOG_ADDR_BACKUP_1 12
#define CEC_LOG_ADDR_BACKUP_2 13
#define CEC_LOG_ADDR_SPECIFIC 14
#define CEC_LOG_ADDR_UNREGISTERED 15 /* as initiator address */
#define CEC_LOG_ADDR_BROADCAST 15 /* as destination address */
/* The logical address types that the CEC device wants to claim */
#define CEC_LOG_ADDR_TYPE_TV 0
#define CEC_LOG_ADDR_TYPE_RECORD 1
#define CEC_LOG_ADDR_TYPE_TUNER 2
#define CEC_LOG_ADDR_TYPE_PLAYBACK 3
#define CEC_LOG_ADDR_TYPE_AUDIOSYSTEM 4
#define CEC_LOG_ADDR_TYPE_SPECIFIC 5
#define CEC_LOG_ADDR_TYPE_UNREGISTERED 6
/*
* Switches should use UNREGISTERED.
* Processors should use SPECIFIC.
*/
#define CEC_LOG_ADDR_MASK_TV (1 << CEC_LOG_ADDR_TV)
#define CEC_LOG_ADDR_MASK_RECORD ((1 << CEC_LOG_ADDR_RECORD_1) | \
(1 << CEC_LOG_ADDR_RECORD_2) | \
(1 << CEC_LOG_ADDR_RECORD_3))
#define CEC_LOG_ADDR_MASK_TUNER ((1 << CEC_LOG_ADDR_TUNER_1) | \
(1 << CEC_LOG_ADDR_TUNER_2) | \
(1 << CEC_LOG_ADDR_TUNER_3) | \
(1 << CEC_LOG_ADDR_TUNER_4))
#define CEC_LOG_ADDR_MASK_PLAYBACK ((1 << CEC_LOG_ADDR_PLAYBACK_1) | \
(1 << CEC_LOG_ADDR_PLAYBACK_2) | \
(1 << CEC_LOG_ADDR_PLAYBACK_3))
#define CEC_LOG_ADDR_MASK_AUDIOSYSTEM (1 << CEC_LOG_ADDR_AUDIOSYSTEM)
#define CEC_LOG_ADDR_MASK_BACKUP ((1 << CEC_LOG_ADDR_BACKUP_1) | \
(1 << CEC_LOG_ADDR_BACKUP_2))
#define CEC_LOG_ADDR_MASK_SPECIFIC (1 << CEC_LOG_ADDR_SPECIFIC)
#define CEC_LOG_ADDR_MASK_UNREGISTERED (1 << CEC_LOG_ADDR_UNREGISTERED)
static __inline__ int cec_has_tv(__u16 log_addr_mask)
{
return log_addr_mask & CEC_LOG_ADDR_MASK_TV;
}
static __inline__ int cec_has_record(__u16 log_addr_mask)
{
return log_addr_mask & CEC_LOG_ADDR_MASK_RECORD;
}
static __inline__ int cec_has_tuner(__u16 log_addr_mask)
{
return log_addr_mask & CEC_LOG_ADDR_MASK_TUNER;
}
static __inline__ int cec_has_playback(__u16 log_addr_mask)
{
return log_addr_mask & CEC_LOG_ADDR_MASK_PLAYBACK;
}
static __inline__ int cec_has_audiosystem(__u16 log_addr_mask)
{
return log_addr_mask & CEC_LOG_ADDR_MASK_AUDIOSYSTEM;
}
static __inline__ int cec_has_backup(__u16 log_addr_mask)
{
return log_addr_mask & CEC_LOG_ADDR_MASK_BACKUP;
}
static __inline__ int cec_has_specific(__u16 log_addr_mask)
{
return log_addr_mask & CEC_LOG_ADDR_MASK_SPECIFIC;
}
static __inline__ int cec_is_unregistered(__u16 log_addr_mask)
{
return log_addr_mask & CEC_LOG_ADDR_MASK_UNREGISTERED;
}
static __inline__ int cec_is_unconfigured(__u16 log_addr_mask)
{
return log_addr_mask == 0;
}
/*
* Use this if there is no vendor ID (CEC_G_VENDOR_ID) or if the vendor ID
* should be disabled (CEC_S_VENDOR_ID)
*/
#define CEC_VENDOR_ID_NONE 0xffffffff
/* The message handling modes */
/* Modes for initiator */
#define CEC_MODE_NO_INITIATOR (0x0 << 0)
#define CEC_MODE_INITIATOR (0x1 << 0)
#define CEC_MODE_EXCL_INITIATOR (0x2 << 0)
#define CEC_MODE_INITIATOR_MSK 0x0f
/* Modes for follower */
#define CEC_MODE_NO_FOLLOWER (0x0 << 4)
#define CEC_MODE_FOLLOWER (0x1 << 4)
#define CEC_MODE_EXCL_FOLLOWER (0x2 << 4)
#define CEC_MODE_EXCL_FOLLOWER_PASSTHRU (0x3 << 4)
#define CEC_MODE_MONITOR_PIN (0xd << 4)
#define CEC_MODE_MONITOR (0xe << 4)
#define CEC_MODE_MONITOR_ALL (0xf << 4)
#define CEC_MODE_FOLLOWER_MSK 0xf0
/* Userspace has to configure the physical address */
#define CEC_CAP_PHYS_ADDR (1 << 0)
/* Userspace has to configure the logical addresses */
#define CEC_CAP_LOG_ADDRS (1 << 1)
/* Userspace can transmit messages (and thus become follower as well) */
#define CEC_CAP_TRANSMIT (1 << 2)
/*
* Passthrough all messages instead of processing them.
*/
#define CEC_CAP_PASSTHROUGH (1 << 3)
/* Supports remote control */
#define CEC_CAP_RC (1 << 4)
/* Hardware can monitor all messages, not just directed and broadcast. */
#define CEC_CAP_MONITOR_ALL (1 << 5)
/* Hardware can use CEC only if the HDMI HPD pin is high. */
#define CEC_CAP_NEEDS_HPD (1 << 6)
/* Hardware can monitor CEC pin transitions */
#define CEC_CAP_MONITOR_PIN (1 << 7)
/* CEC_ADAP_G_CONNECTOR_INFO is available */
#define CEC_CAP_CONNECTOR_INFO (1 << 8)
/**
* struct cec_caps - CEC capabilities structure.
* @driver: name of the CEC device driver.
* @name: name of the CEC device. @driver + @name must be unique.
* @available_log_addrs: number of available logical addresses.
* @capabilities: capabilities of the CEC adapter.
* @version: version of the CEC adapter framework.
*/
struct cec_caps {
char driver[32];
char name[32];
__u32 available_log_addrs;
__u32 capabilities;
__u32 version;
};
/**
* struct cec_log_addrs - CEC logical addresses structure.
* @log_addr: the claimed logical addresses. Set by the driver.
* @log_addr_mask: current logical address mask. Set by the driver.
* @cec_version: the CEC version that the adapter should implement. Set by the
* caller.
* @num_log_addrs: how many logical addresses should be claimed. Set by the
* caller.
* @vendor_id: the vendor ID of the device. Set by the caller.
* @flags: flags.
* @osd_name: the OSD name of the device. Set by the caller.
* @primary_device_type: the primary device type for each logical address.
* Set by the caller.
* @log_addr_type: the logical address types. Set by the caller.
* @all_device_types: CEC 2.0: all device types represented by the logical
* address. Set by the caller.
* @features: CEC 2.0: The logical address features. Set by the caller.
*/
struct cec_log_addrs {
__u8 log_addr[CEC_MAX_LOG_ADDRS];
__u16 log_addr_mask;
__u8 cec_version;
__u8 num_log_addrs;
__u32 vendor_id;
__u32 flags;
char osd_name[15];
__u8 primary_device_type[CEC_MAX_LOG_ADDRS];
__u8 log_addr_type[CEC_MAX_LOG_ADDRS];
/* CEC 2.0 */
__u8 all_device_types[CEC_MAX_LOG_ADDRS];
__u8 features[CEC_MAX_LOG_ADDRS][12];
};
/* Allow a fallback to unregistered */
#define CEC_LOG_ADDRS_FL_ALLOW_UNREG_FALLBACK (1 << 0)
/* Passthrough RC messages to the input subsystem */
#define CEC_LOG_ADDRS_FL_ALLOW_RC_PASSTHRU (1 << 1)
/* CDC-Only device: supports only CDC messages */
#define CEC_LOG_ADDRS_FL_CDC_ONLY (1 << 2)
/**
* struct cec_drm_connector_info - tells which drm connector is
* associated with the CEC adapter.
* @card_no: drm card number
* @connector_id: drm connector ID
*/
struct cec_drm_connector_info {
__u32 card_no;
__u32 connector_id;
};
#define CEC_CONNECTOR_TYPE_NO_CONNECTOR 0
#define CEC_CONNECTOR_TYPE_DRM 1
/**
* struct cec_connector_info - tells if and which connector is
* associated with the CEC adapter.
* @type: connector type (if any)
* @drm: drm connector info
* @raw: array to pad the union
*/
struct cec_connector_info {
__u32 type;
union {
struct cec_drm_connector_info drm;
__u32 raw[16];
};
};
/* Events */
/* Event that occurs when the adapter state changes */
#define CEC_EVENT_STATE_CHANGE 1
/*
* This event is sent when messages are lost because the application
* didn't empty the message queue in time
*/
#define CEC_EVENT_LOST_MSGS 2
#define CEC_EVENT_PIN_CEC_LOW 3
#define CEC_EVENT_PIN_CEC_HIGH 4
#define CEC_EVENT_PIN_HPD_LOW 5
#define CEC_EVENT_PIN_HPD_HIGH 6
#define CEC_EVENT_PIN_5V_LOW 7
#define CEC_EVENT_PIN_5V_HIGH 8
#define CEC_EVENT_FL_INITIAL_STATE (1 << 0)
#define CEC_EVENT_FL_DROPPED_EVENTS (1 << 1)
/**
* struct cec_event_state_change - used when the CEC adapter changes state.
* @phys_addr: the current physical address
* @log_addr_mask: the current logical address mask
* @have_conn_info: if non-zero, then HDMI connector information is available.
* This field is only valid if CEC_CAP_CONNECTOR_INFO is set. If that
* capability is set and @have_conn_info is zero, then that indicates
* that the HDMI connector device is not instantiated, either because
* the HDMI driver is still configuring the device or because the HDMI
* device was unbound.
*/
struct cec_event_state_change {
__u16 phys_addr;
__u16 log_addr_mask;
__u16 have_conn_info;
};
/**
* struct cec_event_lost_msgs - tells you how many messages were lost.
* @lost_msgs: how many messages were lost.
*/
struct cec_event_lost_msgs {
__u32 lost_msgs;
};
/**
* struct cec_event - CEC event structure
* @ts: the timestamp of when the event was sent.
* @event: the event.
* @flags: event flags.
* @state_change: the event payload for CEC_EVENT_STATE_CHANGE.
* @lost_msgs: the event payload for CEC_EVENT_LOST_MSGS.
* @raw: array to pad the union.
*/
struct cec_event {
__u64 ts;
__u32 event;
__u32 flags;
union {
struct cec_event_state_change state_change;
struct cec_event_lost_msgs lost_msgs;
__u32 raw[16];
};
};
/* ioctls */
/* Adapter capabilities */
#define CEC_ADAP_G_CAPS _IOWR('a', 0, struct cec_caps)
/*
* phys_addr is either 0 (if this is the CEC root device)
* or a valid physical address obtained from the sink's EDID
* as read by this CEC device (if this is a source device)
* or a physical address obtained and modified from a sink
* EDID and used for a sink CEC device.
* If nothing is connected, then phys_addr is 0xffff.
* See HDMI 1.4b, section 8.7 (Physical Address).
*
* The CEC_ADAP_S_PHYS_ADDR ioctl may not be available if that is handled
* internally.
*/
#define CEC_ADAP_G_PHYS_ADDR _IOR('a', 1, __u16)
#define CEC_ADAP_S_PHYS_ADDR _IOW('a', 2, __u16)
/*
* Configure the CEC adapter. It sets the device type and which
* logical types it will try to claim. It will return which
* logical addresses it could actually claim.
* An error is returned if the adapter is disabled or if there
* is no physical address assigned.
*/
#define CEC_ADAP_G_LOG_ADDRS _IOR('a', 3, struct cec_log_addrs)
#define CEC_ADAP_S_LOG_ADDRS _IOWR('a', 4, struct cec_log_addrs)
/* Transmit/receive a CEC command */
#define CEC_TRANSMIT _IOWR('a', 5, struct cec_msg)
#define CEC_RECEIVE _IOWR('a', 6, struct cec_msg)
/* Dequeue CEC events */
#define CEC_DQEVENT _IOWR('a', 7, struct cec_event)
/*
* Get and set the message handling mode for this filehandle.
*/
#define CEC_G_MODE _IOR('a', 8, __u32)
#define CEC_S_MODE _IOW('a', 9, __u32)
/* Get the connector info */
#define CEC_ADAP_G_CONNECTOR_INFO _IOR('a', 10, struct cec_connector_info)
/*
* The remainder of this header defines all CEC messages and operands.
* The format matters since it the cec-ctl utility parses it to generate
* code for implementing all these messages.
*
* Comments ending with 'Feature' group messages for each feature.
* If messages are part of multiple features, then the "Has also"
* comment is used to list the previously defined messages that are
* supported by the feature.
*
* Before operands are defined a comment is added that gives the
* name of the operand and in brackets the variable name of the
* corresponding argument in the cec-funcs.h function.
*/
/* Messages */
/* One Touch Play Feature */
#define CEC_MSG_ACTIVE_SOURCE 0x82
#define CEC_MSG_IMAGE_VIEW_ON 0x04
#define CEC_MSG_TEXT_VIEW_ON 0x0d
/* Routing Control Feature */
/*
* Has also:
* CEC_MSG_ACTIVE_SOURCE
*/
#define CEC_MSG_INACTIVE_SOURCE 0x9d
#define CEC_MSG_REQUEST_ACTIVE_SOURCE 0x85
#define CEC_MSG_ROUTING_CHANGE 0x80
#define CEC_MSG_ROUTING_INFORMATION 0x81
#define CEC_MSG_SET_STREAM_PATH 0x86
/* Standby Feature */
#define CEC_MSG_STANDBY 0x36
/* One Touch Record Feature */
#define CEC_MSG_RECORD_OFF 0x0b
#define CEC_MSG_RECORD_ON 0x09
/* Record Source Type Operand (rec_src_type) */
#define CEC_OP_RECORD_SRC_OWN 1
#define CEC_OP_RECORD_SRC_DIGITAL 2
#define CEC_OP_RECORD_SRC_ANALOG 3
#define CEC_OP_RECORD_SRC_EXT_PLUG 4
#define CEC_OP_RECORD_SRC_EXT_PHYS_ADDR 5
/* Service Identification Method Operand (service_id_method) */
#define CEC_OP_SERVICE_ID_METHOD_BY_DIG_ID 0
#define CEC_OP_SERVICE_ID_METHOD_BY_CHANNEL 1
/* Digital Service Broadcast System Operand (dig_bcast_system) */
#define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ARIB_GEN 0x00
#define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ATSC_GEN 0x01
#define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_GEN 0x02
#define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ARIB_BS 0x08
#define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ARIB_CS 0x09
#define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ARIB_T 0x0a
#define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ATSC_CABLE 0x10
#define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ATSC_SAT 0x11
#define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ATSC_T 0x12
#define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_C 0x18
#define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_S 0x19
#define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_S2 0x1a
#define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_T 0x1b
/* Analogue Broadcast Type Operand (ana_bcast_type) */
#define CEC_OP_ANA_BCAST_TYPE_CABLE 0
#define CEC_OP_ANA_BCAST_TYPE_SATELLITE 1
#define CEC_OP_ANA_BCAST_TYPE_TERRESTRIAL 2
/* Broadcast System Operand (bcast_system) */
#define CEC_OP_BCAST_SYSTEM_PAL_BG 0x00
#define CEC_OP_BCAST_SYSTEM_SECAM_LQ 0x01 /* SECAM L' */
#define CEC_OP_BCAST_SYSTEM_PAL_M 0x02
#define CEC_OP_BCAST_SYSTEM_NTSC_M 0x03
#define CEC_OP_BCAST_SYSTEM_PAL_I 0x04
#define CEC_OP_BCAST_SYSTEM_SECAM_DK 0x05
#define CEC_OP_BCAST_SYSTEM_SECAM_BG 0x06
#define CEC_OP_BCAST_SYSTEM_SECAM_L 0x07
#define CEC_OP_BCAST_SYSTEM_PAL_DK 0x08
#define CEC_OP_BCAST_SYSTEM_OTHER 0x1f
/* Channel Number Format Operand (channel_number_fmt) */
#define CEC_OP_CHANNEL_NUMBER_FMT_1_PART 0x01
#define CEC_OP_CHANNEL_NUMBER_FMT_2_PART 0x02
#define CEC_MSG_RECORD_STATUS 0x0a
/* Record Status Operand (rec_status) */
#define CEC_OP_RECORD_STATUS_CUR_SRC 0x01
#define CEC_OP_RECORD_STATUS_DIG_SERVICE 0x02
#define CEC_OP_RECORD_STATUS_ANA_SERVICE 0x03
#define CEC_OP_RECORD_STATUS_EXT_INPUT 0x04
#define CEC_OP_RECORD_STATUS_NO_DIG_SERVICE 0x05
#define CEC_OP_RECORD_STATUS_NO_ANA_SERVICE 0x06
#define CEC_OP_RECORD_STATUS_NO_SERVICE 0x07
#define CEC_OP_RECORD_STATUS_INVALID_EXT_PLUG 0x09
#define CEC_OP_RECORD_STATUS_INVALID_EXT_PHYS_ADDR 0x0a
#define CEC_OP_RECORD_STATUS_UNSUP_CA 0x0b
#define CEC_OP_RECORD_STATUS_NO_CA_ENTITLEMENTS 0x0c
#define CEC_OP_RECORD_STATUS_CANT_COPY_SRC 0x0d
#define CEC_OP_RECORD_STATUS_NO_MORE_COPIES 0x0e
#define CEC_OP_RECORD_STATUS_NO_MEDIA 0x10
#define CEC_OP_RECORD_STATUS_PLAYING 0x11
#define CEC_OP_RECORD_STATUS_ALREADY_RECORDING 0x12
#define CEC_OP_RECORD_STATUS_MEDIA_PROT 0x13
#define CEC_OP_RECORD_STATUS_NO_SIGNAL 0x14
#define CEC_OP_RECORD_STATUS_MEDIA_PROBLEM 0x15
#define CEC_OP_RECORD_STATUS_NO_SPACE 0x16
#define CEC_OP_RECORD_STATUS_PARENTAL_LOCK 0x17
#define CEC_OP_RECORD_STATUS_TERMINATED_OK 0x1a
#define CEC_OP_RECORD_STATUS_ALREADY_TERM 0x1b
#define CEC_OP_RECORD_STATUS_OTHER 0x1f
#define CEC_MSG_RECORD_TV_SCREEN 0x0f
/* Timer Programming Feature */
#define CEC_MSG_CLEAR_ANALOGUE_TIMER 0x33
/* Recording Sequence Operand (recording_seq) */
#define CEC_OP_REC_SEQ_SUNDAY 0x01
#define CEC_OP_REC_SEQ_MONDAY 0x02
#define CEC_OP_REC_SEQ_TUESDAY 0x04
#define CEC_OP_REC_SEQ_WEDNESDAY 0x08
#define CEC_OP_REC_SEQ_THURSDAY 0x10
#define CEC_OP_REC_SEQ_FRIDAY 0x20
#define CEC_OP_REC_SEQ_SATERDAY 0x40
#define CEC_OP_REC_SEQ_ONCE_ONLY 0x00
#define CEC_MSG_CLEAR_DIGITAL_TIMER 0x99
#define CEC_MSG_CLEAR_EXT_TIMER 0xa1
/* External Source Specifier Operand (ext_src_spec) */
#define CEC_OP_EXT_SRC_PLUG 0x04
#define CEC_OP_EXT_SRC_PHYS_ADDR 0x05
#define CEC_MSG_SET_ANALOGUE_TIMER 0x34
#define CEC_MSG_SET_DIGITAL_TIMER 0x97
#define CEC_MSG_SET_EXT_TIMER 0xa2
#define CEC_MSG_SET_TIMER_PROGRAM_TITLE 0x67
#define CEC_MSG_TIMER_CLEARED_STATUS 0x43
/* Timer Cleared Status Data Operand (timer_cleared_status) */
#define CEC_OP_TIMER_CLR_STAT_RECORDING 0x00
#define CEC_OP_TIMER_CLR_STAT_NO_MATCHING 0x01
#define CEC_OP_TIMER_CLR_STAT_NO_INFO 0x02
#define CEC_OP_TIMER_CLR_STAT_CLEARED 0x80
#define CEC_MSG_TIMER_STATUS 0x35
/* Timer Overlap Warning Operand (timer_overlap_warning) */
#define CEC_OP_TIMER_OVERLAP_WARNING_NO_OVERLAP 0
#define CEC_OP_TIMER_OVERLAP_WARNING_OVERLAP 1
/* Media Info Operand (media_info) */
#define CEC_OP_MEDIA_INFO_UNPROT_MEDIA 0
#define CEC_OP_MEDIA_INFO_PROT_MEDIA 1
#define CEC_OP_MEDIA_INFO_NO_MEDIA 2
/* Programmed Indicator Operand (prog_indicator) */
#define CEC_OP_PROG_IND_NOT_PROGRAMMED 0
#define CEC_OP_PROG_IND_PROGRAMMED 1
/* Programmed Info Operand (prog_info) */
#define CEC_OP_PROG_INFO_ENOUGH_SPACE 0x08
#define CEC_OP_PROG_INFO_NOT_ENOUGH_SPACE 0x09
#define CEC_OP_PROG_INFO_MIGHT_NOT_BE_ENOUGH_SPACE 0x0b
#define CEC_OP_PROG_INFO_NONE_AVAILABLE 0x0a
/* Not Programmed Error Info Operand (prog_error) */
#define CEC_OP_PROG_ERROR_NO_FREE_TIMER 0x01
#define CEC_OP_PROG_ERROR_DATE_OUT_OF_RANGE 0x02
#define CEC_OP_PROG_ERROR_REC_SEQ_ERROR 0x03
#define CEC_OP_PROG_ERROR_INV_EXT_PLUG 0x04
#define CEC_OP_PROG_ERROR_INV_EXT_PHYS_ADDR 0x05
#define CEC_OP_PROG_ERROR_CA_UNSUPP 0x06
#define CEC_OP_PROG_ERROR_INSUF_CA_ENTITLEMENTS 0x07
#define CEC_OP_PROG_ERROR_RESOLUTION_UNSUPP 0x08
#define CEC_OP_PROG_ERROR_PARENTAL_LOCK 0x09
#define CEC_OP_PROG_ERROR_CLOCK_FAILURE 0x0a
#define CEC_OP_PROG_ERROR_DUPLICATE 0x0e
/* System Information Feature */
#define CEC_MSG_CEC_VERSION 0x9e
/* CEC Version Operand (cec_version) */
#define CEC_OP_CEC_VERSION_1_3A 4
#define CEC_OP_CEC_VERSION_1_4 5
#define CEC_OP_CEC_VERSION_2_0 6
#define CEC_MSG_GET_CEC_VERSION 0x9f
#define CEC_MSG_GIVE_PHYSICAL_ADDR 0x83
#define CEC_MSG_GET_MENU_LANGUAGE 0x91
#define CEC_MSG_REPORT_PHYSICAL_ADDR 0x84
/* Primary Device Type Operand (prim_devtype) */
#define CEC_OP_PRIM_DEVTYPE_TV 0
#define CEC_OP_PRIM_DEVTYPE_RECORD 1
#define CEC_OP_PRIM_DEVTYPE_TUNER 3
#define CEC_OP_PRIM_DEVTYPE_PLAYBACK 4
#define CEC_OP_PRIM_DEVTYPE_AUDIOSYSTEM 5
#define CEC_OP_PRIM_DEVTYPE_SWITCH 6
#define CEC_OP_PRIM_DEVTYPE_PROCESSOR 7
#define CEC_MSG_SET_MENU_LANGUAGE 0x32
#define CEC_MSG_REPORT_FEATURES 0xa6 /* HDMI 2.0 */
/* All Device Types Operand (all_device_types) */
#define CEC_OP_ALL_DEVTYPE_TV 0x80
#define CEC_OP_ALL_DEVTYPE_RECORD 0x40
#define CEC_OP_ALL_DEVTYPE_TUNER 0x20
#define CEC_OP_ALL_DEVTYPE_PLAYBACK 0x10
#define CEC_OP_ALL_DEVTYPE_AUDIOSYSTEM 0x08
#define CEC_OP_ALL_DEVTYPE_SWITCH 0x04
/*
* And if you wondering what happened to PROCESSOR devices: those should
* be mapped to a SWITCH.
*/
/* Valid for RC Profile and Device Feature operands */
#define CEC_OP_FEAT_EXT 0x80 /* Extension bit */
/* RC Profile Operand (rc_profile) */
#define CEC_OP_FEAT_RC_TV_PROFILE_NONE 0x00
#define CEC_OP_FEAT_RC_TV_PROFILE_1 0x02
#define CEC_OP_FEAT_RC_TV_PROFILE_2 0x06
#define CEC_OP_FEAT_RC_TV_PROFILE_3 0x0a
#define CEC_OP_FEAT_RC_TV_PROFILE_4 0x0e
#define CEC_OP_FEAT_RC_SRC_HAS_DEV_ROOT_MENU 0x50
#define CEC_OP_FEAT_RC_SRC_HAS_DEV_SETUP_MENU 0x48
#define CEC_OP_FEAT_RC_SRC_HAS_CONTENTS_MENU 0x44
#define CEC_OP_FEAT_RC_SRC_HAS_MEDIA_TOP_MENU 0x42
#define CEC_OP_FEAT_RC_SRC_HAS_MEDIA_CONTEXT_MENU 0x41
/* Device Feature Operand (dev_features) */
#define CEC_OP_FEAT_DEV_HAS_RECORD_TV_SCREEN 0x40
#define CEC_OP_FEAT_DEV_HAS_SET_OSD_STRING 0x20
#define CEC_OP_FEAT_DEV_HAS_DECK_CONTROL 0x10
#define CEC_OP_FEAT_DEV_HAS_SET_AUDIO_RATE 0x08
#define CEC_OP_FEAT_DEV_SINK_HAS_ARC_TX 0x04
#define CEC_OP_FEAT_DEV_SOURCE_HAS_ARC_RX 0x02
#define CEC_OP_FEAT_DEV_HAS_SET_AUDIO_VOLUME_LEVEL 0x01
#define CEC_MSG_GIVE_FEATURES 0xa5 /* HDMI 2.0 */
/* Deck Control Feature */
#define CEC_MSG_DECK_CONTROL 0x42
/* Deck Control Mode Operand (deck_control_mode) */
#define CEC_OP_DECK_CTL_MODE_SKIP_FWD 1
#define CEC_OP_DECK_CTL_MODE_SKIP_REV 2
#define CEC_OP_DECK_CTL_MODE_STOP 3
#define CEC_OP_DECK_CTL_MODE_EJECT 4
#define CEC_MSG_DECK_STATUS 0x1b
/* Deck Info Operand (deck_info) */
#define CEC_OP_DECK_INFO_PLAY 0x11
#define CEC_OP_DECK_INFO_RECORD 0x12
#define CEC_OP_DECK_INFO_PLAY_REV 0x13
#define CEC_OP_DECK_INFO_STILL 0x14
#define CEC_OP_DECK_INFO_SLOW 0x15
#define CEC_OP_DECK_INFO_SLOW_REV 0x16
#define CEC_OP_DECK_INFO_FAST_FWD 0x17
#define CEC_OP_DECK_INFO_FAST_REV 0x18
#define CEC_OP_DECK_INFO_NO_MEDIA 0x19
#define CEC_OP_DECK_INFO_STOP 0x1a
#define CEC_OP_DECK_INFO_SKIP_FWD 0x1b
#define CEC_OP_DECK_INFO_SKIP_REV 0x1c
#define CEC_OP_DECK_INFO_INDEX_SEARCH_FWD 0x1d
#define CEC_OP_DECK_INFO_INDEX_SEARCH_REV 0x1e
#define CEC_OP_DECK_INFO_OTHER 0x1f
#define CEC_MSG_GIVE_DECK_STATUS 0x1a
/* Status Request Operand (status_req) */
#define CEC_OP_STATUS_REQ_ON 1
#define CEC_OP_STATUS_REQ_OFF 2
#define CEC_OP_STATUS_REQ_ONCE 3
#define CEC_MSG_PLAY 0x41
/* Play Mode Operand (play_mode) */
#define CEC_OP_PLAY_MODE_PLAY_FWD 0x24
#define CEC_OP_PLAY_MODE_PLAY_REV 0x20
#define CEC_OP_PLAY_MODE_PLAY_STILL 0x25
#define CEC_OP_PLAY_MODE_PLAY_FAST_FWD_MIN 0x05
#define CEC_OP_PLAY_MODE_PLAY_FAST_FWD_MED 0x06
#define CEC_OP_PLAY_MODE_PLAY_FAST_FWD_MAX 0x07
#define CEC_OP_PLAY_MODE_PLAY_FAST_REV_MIN 0x09
#define CEC_OP_PLAY_MODE_PLAY_FAST_REV_MED 0x0a
#define CEC_OP_PLAY_MODE_PLAY_FAST_REV_MAX 0x0b
#define CEC_OP_PLAY_MODE_PLAY_SLOW_FWD_MIN 0x15
#define CEC_OP_PLAY_MODE_PLAY_SLOW_FWD_MED 0x16
#define CEC_OP_PLAY_MODE_PLAY_SLOW_FWD_MAX 0x17
#define CEC_OP_PLAY_MODE_PLAY_SLOW_REV_MIN 0x19
#define CEC_OP_PLAY_MODE_PLAY_SLOW_REV_MED 0x1a
#define CEC_OP_PLAY_MODE_PLAY_SLOW_REV_MAX 0x1b
/* Tuner Control Feature */
#define CEC_MSG_GIVE_TUNER_DEVICE_STATUS 0x08
#define CEC_MSG_SELECT_ANALOGUE_SERVICE 0x92
#define CEC_MSG_SELECT_DIGITAL_SERVICE 0x93
#define CEC_MSG_TUNER_DEVICE_STATUS 0x07
/* Recording Flag Operand (rec_flag) */
#define CEC_OP_REC_FLAG_NOT_USED 0
#define CEC_OP_REC_FLAG_USED 1
/* Tuner Display Info Operand (tuner_display_info) */
#define CEC_OP_TUNER_DISPLAY_INFO_DIGITAL 0
#define CEC_OP_TUNER_DISPLAY_INFO_NONE 1
#define CEC_OP_TUNER_DISPLAY_INFO_ANALOGUE 2
#define CEC_MSG_TUNER_STEP_DECREMENT 0x06
#define CEC_MSG_TUNER_STEP_INCREMENT 0x05
/* Vendor Specific Commands Feature */
/*
* Has also:
* CEC_MSG_CEC_VERSION
* CEC_MSG_GET_CEC_VERSION
*/
#define CEC_MSG_DEVICE_VENDOR_ID 0x87
#define CEC_MSG_GIVE_DEVICE_VENDOR_ID 0x8c
#define CEC_MSG_VENDOR_COMMAND 0x89
#define CEC_MSG_VENDOR_COMMAND_WITH_ID 0xa0
#define CEC_MSG_VENDOR_REMOTE_BUTTON_DOWN 0x8a
#define CEC_MSG_VENDOR_REMOTE_BUTTON_UP 0x8b
/* OSD Display Feature */
#define CEC_MSG_SET_OSD_STRING 0x64
/* Display Control Operand (disp_ctl) */
#define CEC_OP_DISP_CTL_DEFAULT 0x00
#define CEC_OP_DISP_CTL_UNTIL_CLEARED 0x40
#define CEC_OP_DISP_CTL_CLEAR 0x80
/* Device OSD Transfer Feature */
#define CEC_MSG_GIVE_OSD_NAME 0x46
#define CEC_MSG_SET_OSD_NAME 0x47
/* Device Menu Control Feature */
#define CEC_MSG_MENU_REQUEST 0x8d
/* Menu Request Type Operand (menu_req) */
#define CEC_OP_MENU_REQUEST_ACTIVATE 0x00
#define CEC_OP_MENU_REQUEST_DEACTIVATE 0x01
#define CEC_OP_MENU_REQUEST_QUERY 0x02
#define CEC_MSG_MENU_STATUS 0x8e
/* Menu State Operand (menu_state) */
#define CEC_OP_MENU_STATE_ACTIVATED 0x00
#define CEC_OP_MENU_STATE_DEACTIVATED 0x01
#define CEC_MSG_USER_CONTROL_PRESSED 0x44
/* UI Command Operand (ui_cmd) */
#define CEC_OP_UI_CMD_SELECT 0x00
#define CEC_OP_UI_CMD_UP 0x01
#define CEC_OP_UI_CMD_DOWN 0x02
#define CEC_OP_UI_CMD_LEFT 0x03
#define CEC_OP_UI_CMD_RIGHT 0x04
#define CEC_OP_UI_CMD_RIGHT_UP 0x05
#define CEC_OP_UI_CMD_RIGHT_DOWN 0x06
#define CEC_OP_UI_CMD_LEFT_UP 0x07
#define CEC_OP_UI_CMD_LEFT_DOWN 0x08
#define CEC_OP_UI_CMD_DEVICE_ROOT_MENU 0x09
#define CEC_OP_UI_CMD_DEVICE_SETUP_MENU 0x0a
#define CEC_OP_UI_CMD_CONTENTS_MENU 0x0b
#define CEC_OP_UI_CMD_FAVORITE_MENU 0x0c
#define CEC_OP_UI_CMD_BACK 0x0d
#define CEC_OP_UI_CMD_MEDIA_TOP_MENU 0x10
#define CEC_OP_UI_CMD_MEDIA_CONTEXT_SENSITIVE_MENU 0x11
#define CEC_OP_UI_CMD_NUMBER_ENTRY_MODE 0x1d
#define CEC_OP_UI_CMD_NUMBER_11 0x1e
#define CEC_OP_UI_CMD_NUMBER_12 0x1f
#define CEC_OP_UI_CMD_NUMBER_0_OR_NUMBER_10 0x20
#define CEC_OP_UI_CMD_NUMBER_1 0x21
#define CEC_OP_UI_CMD_NUMBER_2 0x22
#define CEC_OP_UI_CMD_NUMBER_3 0x23
#define CEC_OP_UI_CMD_NUMBER_4 0x24
#define CEC_OP_UI_CMD_NUMBER_5 0x25
#define CEC_OP_UI_CMD_NUMBER_6 0x26
#define CEC_OP_UI_CMD_NUMBER_7 0x27
#define CEC_OP_UI_CMD_NUMBER_8 0x28
#define CEC_OP_UI_CMD_NUMBER_9 0x29
#define CEC_OP_UI_CMD_DOT 0x2a
#define CEC_OP_UI_CMD_ENTER 0x2b
#define CEC_OP_UI_CMD_CLEAR 0x2c
#define CEC_OP_UI_CMD_NEXT_FAVORITE 0x2f
#define CEC_OP_UI_CMD_CHANNEL_UP 0x30
#define CEC_OP_UI_CMD_CHANNEL_DOWN 0x31
#define CEC_OP_UI_CMD_PREVIOUS_CHANNEL 0x32
#define CEC_OP_UI_CMD_SOUND_SELECT 0x33
#define CEC_OP_UI_CMD_INPUT_SELECT 0x34
#define CEC_OP_UI_CMD_DISPLAY_INFORMATION 0x35
#define CEC_OP_UI_CMD_HELP 0x36
#define CEC_OP_UI_CMD_PAGE_UP 0x37
#define CEC_OP_UI_CMD_PAGE_DOWN 0x38
#define CEC_OP_UI_CMD_POWER 0x40
#define CEC_OP_UI_CMD_VOLUME_UP 0x41
#define CEC_OP_UI_CMD_VOLUME_DOWN 0x42
#define CEC_OP_UI_CMD_MUTE 0x43
#define CEC_OP_UI_CMD_PLAY 0x44
#define CEC_OP_UI_CMD_STOP 0x45
#define CEC_OP_UI_CMD_PAUSE 0x46
#define CEC_OP_UI_CMD_RECORD 0x47
#define CEC_OP_UI_CMD_REWIND 0x48
#define CEC_OP_UI_CMD_FAST_FORWARD 0x49
#define CEC_OP_UI_CMD_EJECT 0x4a
#define CEC_OP_UI_CMD_SKIP_FORWARD 0x4b
#define CEC_OP_UI_CMD_SKIP_BACKWARD 0x4c
#define CEC_OP_UI_CMD_STOP_RECORD 0x4d
#define CEC_OP_UI_CMD_PAUSE_RECORD 0x4e
#define CEC_OP_UI_CMD_ANGLE 0x50
#define CEC_OP_UI_CMD_SUB_PICTURE 0x51
#define CEC_OP_UI_CMD_VIDEO_ON_DEMAND 0x52
#define CEC_OP_UI_CMD_ELECTRONIC_PROGRAM_GUIDE 0x53
#define CEC_OP_UI_CMD_TIMER_PROGRAMMING 0x54
#define CEC_OP_UI_CMD_INITIAL_CONFIGURATION 0x55
#define CEC_OP_UI_CMD_SELECT_BROADCAST_TYPE 0x56
#define CEC_OP_UI_CMD_SELECT_SOUND_PRESENTATION 0x57
#define CEC_OP_UI_CMD_AUDIO_DESCRIPTION 0x58
#define CEC_OP_UI_CMD_INTERNET 0x59
#define CEC_OP_UI_CMD_3D_MODE 0x5a
#define CEC_OP_UI_CMD_PLAY_FUNCTION 0x60
#define CEC_OP_UI_CMD_PAUSE_PLAY_FUNCTION 0x61
#define CEC_OP_UI_CMD_RECORD_FUNCTION 0x62
#define CEC_OP_UI_CMD_PAUSE_RECORD_FUNCTION 0x63
#define CEC_OP_UI_CMD_STOP_FUNCTION 0x64
#define CEC_OP_UI_CMD_MUTE_FUNCTION 0x65
#define CEC_OP_UI_CMD_RESTORE_VOLUME_FUNCTION 0x66
#define CEC_OP_UI_CMD_TUNE_FUNCTION 0x67
#define CEC_OP_UI_CMD_SELECT_MEDIA_FUNCTION 0x68
#define CEC_OP_UI_CMD_SELECT_AV_INPUT_FUNCTION 0x69
#define CEC_OP_UI_CMD_SELECT_AUDIO_INPUT_FUNCTION 0x6a
#define CEC_OP_UI_CMD_POWER_TOGGLE_FUNCTION 0x6b
#define CEC_OP_UI_CMD_POWER_OFF_FUNCTION 0x6c
#define CEC_OP_UI_CMD_POWER_ON_FUNCTION 0x6d
#define CEC_OP_UI_CMD_F1_BLUE 0x71
#define CEC_OP_UI_CMD_F2_RED 0x72
#define CEC_OP_UI_CMD_F3_GREEN 0x73
#define CEC_OP_UI_CMD_F4_YELLOW 0x74
#define CEC_OP_UI_CMD_F5 0x75
#define CEC_OP_UI_CMD_DATA 0x76
/* UI Broadcast Type Operand (ui_bcast_type) */
#define CEC_OP_UI_BCAST_TYPE_TOGGLE_ALL 0x00
#define CEC_OP_UI_BCAST_TYPE_TOGGLE_DIG_ANA 0x01
#define CEC_OP_UI_BCAST_TYPE_ANALOGUE 0x10
#define CEC_OP_UI_BCAST_TYPE_ANALOGUE_T 0x20
#define CEC_OP_UI_BCAST_TYPE_ANALOGUE_CABLE 0x30
#define CEC_OP_UI_BCAST_TYPE_ANALOGUE_SAT 0x40
#define CEC_OP_UI_BCAST_TYPE_DIGITAL 0x50
#define CEC_OP_UI_BCAST_TYPE_DIGITAL_T 0x60
#define CEC_OP_UI_BCAST_TYPE_DIGITAL_CABLE 0x70
#define CEC_OP_UI_BCAST_TYPE_DIGITAL_SAT 0x80
#define CEC_OP_UI_BCAST_TYPE_DIGITAL_COM_SAT 0x90
#define CEC_OP_UI_BCAST_TYPE_DIGITAL_COM_SAT2 0x91
#define CEC_OP_UI_BCAST_TYPE_IP 0xa0
/* UI Sound Presentation Control Operand (ui_snd_pres_ctl) */
#define CEC_OP_UI_SND_PRES_CTL_DUAL_MONO 0x10
#define CEC_OP_UI_SND_PRES_CTL_KARAOKE 0x20
#define CEC_OP_UI_SND_PRES_CTL_DOWNMIX 0x80
#define CEC_OP_UI_SND_PRES_CTL_REVERB 0x90
#define CEC_OP_UI_SND_PRES_CTL_EQUALIZER 0xa0
#define CEC_OP_UI_SND_PRES_CTL_BASS_UP 0xb1
#define CEC_OP_UI_SND_PRES_CTL_BASS_NEUTRAL 0xb2
#define CEC_OP_UI_SND_PRES_CTL_BASS_DOWN 0xb3
#define CEC_OP_UI_SND_PRES_CTL_TREBLE_UP 0xc1
#define CEC_OP_UI_SND_PRES_CTL_TREBLE_NEUTRAL 0xc2
#define CEC_OP_UI_SND_PRES_CTL_TREBLE_DOWN 0xc3
#define CEC_MSG_USER_CONTROL_RELEASED 0x45
/* Remote Control Passthrough Feature */
/*
* Has also:
* CEC_MSG_USER_CONTROL_PRESSED
* CEC_MSG_USER_CONTROL_RELEASED
*/
/* Power Status Feature */
#define CEC_MSG_GIVE_DEVICE_POWER_STATUS 0x8f
#define CEC_MSG_REPORT_POWER_STATUS 0x90
/* Power Status Operand (pwr_state) */
#define CEC_OP_POWER_STATUS_ON 0
#define CEC_OP_POWER_STATUS_STANDBY 1
#define CEC_OP_POWER_STATUS_TO_ON 2
#define CEC_OP_POWER_STATUS_TO_STANDBY 3
/* General Protocol Messages */
#define CEC_MSG_FEATURE_ABORT 0x00
/* Abort Reason Operand (reason) */
#define CEC_OP_ABORT_UNRECOGNIZED_OP 0
#define CEC_OP_ABORT_INCORRECT_MODE 1
#define CEC_OP_ABORT_NO_SOURCE 2
#define CEC_OP_ABORT_INVALID_OP 3
#define CEC_OP_ABORT_REFUSED 4
#define CEC_OP_ABORT_UNDETERMINED 5
#define CEC_MSG_ABORT 0xff
/* System Audio Control Feature */
/*
* Has also:
* CEC_MSG_USER_CONTROL_PRESSED
* CEC_MSG_USER_CONTROL_RELEASED
*/
#define CEC_MSG_GIVE_AUDIO_STATUS 0x71
#define CEC_MSG_GIVE_SYSTEM_AUDIO_MODE_STATUS 0x7d
#define CEC_MSG_REPORT_AUDIO_STATUS 0x7a
/* Audio Mute Status Operand (aud_mute_status) */
#define CEC_OP_AUD_MUTE_STATUS_OFF 0
#define CEC_OP_AUD_MUTE_STATUS_ON 1
#define CEC_MSG_REPORT_SHORT_AUDIO_DESCRIPTOR 0xa3
#define CEC_MSG_REQUEST_SHORT_AUDIO_DESCRIPTOR 0xa4
#define CEC_MSG_SET_SYSTEM_AUDIO_MODE 0x72
/* System Audio Status Operand (sys_aud_status) */
#define CEC_OP_SYS_AUD_STATUS_OFF 0
#define CEC_OP_SYS_AUD_STATUS_ON 1
#define CEC_MSG_SYSTEM_AUDIO_MODE_REQUEST 0x70
#define CEC_MSG_SYSTEM_AUDIO_MODE_STATUS 0x7e
/* Audio Format ID Operand (audio_format_id) */
#define CEC_OP_AUD_FMT_ID_CEA861 0
#define CEC_OP_AUD_FMT_ID_CEA861_CXT 1
#define CEC_MSG_SET_AUDIO_VOLUME_LEVEL 0x73
/* Audio Rate Control Feature */
#define CEC_MSG_SET_AUDIO_RATE 0x9a
/* Audio Rate Operand (audio_rate) */
#define CEC_OP_AUD_RATE_OFF 0
#define CEC_OP_AUD_RATE_WIDE_STD 1
#define CEC_OP_AUD_RATE_WIDE_FAST 2
#define CEC_OP_AUD_RATE_WIDE_SLOW 3
#define CEC_OP_AUD_RATE_NARROW_STD 4
#define CEC_OP_AUD_RATE_NARROW_FAST 5
#define CEC_OP_AUD_RATE_NARROW_SLOW 6
/* Audio Return Channel Control Feature */
#define CEC_MSG_INITIATE_ARC 0xc0
#define CEC_MSG_REPORT_ARC_INITIATED 0xc1
#define CEC_MSG_REPORT_ARC_TERMINATED 0xc2
#define CEC_MSG_REQUEST_ARC_INITIATION 0xc3
#define CEC_MSG_REQUEST_ARC_TERMINATION 0xc4
#define CEC_MSG_TERMINATE_ARC 0xc5
/* Dynamic Audio Lipsync Feature */
/* Only for CEC 2.0 and up */
#define CEC_MSG_REQUEST_CURRENT_LATENCY 0xa7
#define CEC_MSG_REPORT_CURRENT_LATENCY 0xa8
/* Low Latency Mode Operand (low_latency_mode) */
#define CEC_OP_LOW_LATENCY_MODE_OFF 0
#define CEC_OP_LOW_LATENCY_MODE_ON 1
/* Audio Output Compensated Operand (audio_out_compensated) */
#define CEC_OP_AUD_OUT_COMPENSATED_NA 0
#define CEC_OP_AUD_OUT_COMPENSATED_DELAY 1
#define CEC_OP_AUD_OUT_COMPENSATED_NO_DELAY 2
#define CEC_OP_AUD_OUT_COMPENSATED_PARTIAL_DELAY 3
/* Capability Discovery and Control Feature */
#define CEC_MSG_CDC_MESSAGE 0xf8
/* Ethernet-over-HDMI: nobody ever does this... */
#define CEC_MSG_CDC_HEC_INQUIRE_STATE 0x00
#define CEC_MSG_CDC_HEC_REPORT_STATE 0x01
/* HEC Functionality State Operand (hec_func_state) */
#define CEC_OP_HEC_FUNC_STATE_NOT_SUPPORTED 0
#define CEC_OP_HEC_FUNC_STATE_INACTIVE 1
#define CEC_OP_HEC_FUNC_STATE_ACTIVE 2
#define CEC_OP_HEC_FUNC_STATE_ACTIVATION_FIELD 3
/* Host Functionality State Operand (host_func_state) */
#define CEC_OP_HOST_FUNC_STATE_NOT_SUPPORTED 0
#define CEC_OP_HOST_FUNC_STATE_INACTIVE 1
#define CEC_OP_HOST_FUNC_STATE_ACTIVE 2
/* ENC Functionality State Operand (enc_func_state) */
#define CEC_OP_ENC_FUNC_STATE_EXT_CON_NOT_SUPPORTED 0
#define CEC_OP_ENC_FUNC_STATE_EXT_CON_INACTIVE 1
#define CEC_OP_ENC_FUNC_STATE_EXT_CON_ACTIVE 2
/* CDC Error Code Operand (cdc_errcode) */
#define CEC_OP_CDC_ERROR_CODE_NONE 0
#define CEC_OP_CDC_ERROR_CODE_CAP_UNSUPPORTED 1
#define CEC_OP_CDC_ERROR_CODE_WRONG_STATE 2
#define CEC_OP_CDC_ERROR_CODE_OTHER 3
/* HEC Support Operand (hec_support) */
#define CEC_OP_HEC_SUPPORT_NO 0
#define CEC_OP_HEC_SUPPORT_YES 1
/* HEC Activation Operand (hec_activation) */
#define CEC_OP_HEC_ACTIVATION_ON 0
#define CEC_OP_HEC_ACTIVATION_OFF 1
#define CEC_MSG_CDC_HEC_SET_STATE_ADJACENT 0x02
#define CEC_MSG_CDC_HEC_SET_STATE 0x03
/* HEC Set State Operand (hec_set_state) */
#define CEC_OP_HEC_SET_STATE_DEACTIVATE 0
#define CEC_OP_HEC_SET_STATE_ACTIVATE 1
#define CEC_MSG_CDC_HEC_REQUEST_DEACTIVATION 0x04
#define CEC_MSG_CDC_HEC_NOTIFY_ALIVE 0x05
#define CEC_MSG_CDC_HEC_DISCOVER 0x06
/* Hotplug Detect messages */
#define CEC_MSG_CDC_HPD_SET_STATE 0x10
/* HPD State Operand (hpd_state) */
#define CEC_OP_HPD_STATE_CP_EDID_DISABLE 0
#define CEC_OP_HPD_STATE_CP_EDID_ENABLE 1
#define CEC_OP_HPD_STATE_CP_EDID_DISABLE_ENABLE 2
#define CEC_OP_HPD_STATE_EDID_DISABLE 3
#define CEC_OP_HPD_STATE_EDID_ENABLE 4
#define CEC_OP_HPD_STATE_EDID_DISABLE_ENABLE 5
#define CEC_MSG_CDC_HPD_REPORT_STATE 0x11
/* HPD Error Code Operand (hpd_error) */
#define CEC_OP_HPD_ERROR_NONE 0
#define CEC_OP_HPD_ERROR_INITIATOR_NOT_CAPABLE 1
#define CEC_OP_HPD_ERROR_INITIATOR_WRONG_STATE 2
#define CEC_OP_HPD_ERROR_OTHER 3
#define CEC_OP_HPD_ERROR_NONE_NO_VIDEO 4
/* End of Messages */
/* Helper functions to identify the 'special' CEC devices */
static __inline__ int cec_is_2nd_tv(const struct cec_log_addrs *las)
{
/*
* It is a second TV if the logical address is 14 or 15 and the
* primary device type is a TV.
*/
return las->num_log_addrs &&
las->log_addr[0] >= CEC_LOG_ADDR_SPECIFIC &&
las->primary_device_type[0] == CEC_OP_PRIM_DEVTYPE_TV;
}
static __inline__ int cec_is_processor(const struct cec_log_addrs *las)
{
/*
* It is a processor if the logical address is 12-15 and the
* primary device type is a Processor.
*/
return las->num_log_addrs &&
las->log_addr[0] >= CEC_LOG_ADDR_BACKUP_1 &&
las->primary_device_type[0] == CEC_OP_PRIM_DEVTYPE_PROCESSOR;
}
static __inline__ int cec_is_switch(const struct cec_log_addrs *las)
{
/*
* It is a switch if the logical address is 15 and the
* primary device type is a Switch and the CDC-Only flag is not set.
*/
return las->num_log_addrs == 1 &&
las->log_addr[0] == CEC_LOG_ADDR_UNREGISTERED &&
las->primary_device_type[0] == CEC_OP_PRIM_DEVTYPE_SWITCH &&
!(las->flags & CEC_LOG_ADDRS_FL_CDC_ONLY);
}
static __inline__ int cec_is_cdc_only(const struct cec_log_addrs *las)
{
/*
* It is a CDC-only device if the logical address is 15 and the
* primary device type is a Switch and the CDC-Only flag is set.
*/
return las->num_log_addrs == 1 &&
las->log_addr[0] == CEC_LOG_ADDR_UNREGISTERED &&
las->primary_device_type[0] == CEC_OP_PRIM_DEVTYPE_SWITCH &&
(las->flags & CEC_LOG_ADDRS_FL_CDC_ONLY);
}
#endif
